Wedding Cake Pool Steps Parts (2023)

FAQs

What are my pool steps made of? ›

Swimming pool stairs can be constructed from a wide range of materials, such as fiberglass, steel, and polymer, which each have unique pros and cons.

Steps are an essential element of pool design, flowing seamlessly into the pool's appearance and function. While they're typically built into the pool structure, they can be added during a renovation with our inground pool steps replacement services.

Although it's not a common occurrence, over your swimming pool's lifetime it is possible your step may crack. Luckily, repairing a cracked pool step is a fairly simple process, and one you can do on your own.

It's a highly durable, cost-effective solution versus replacing a leaking step gasket in an inground pool. AquaFlex Underwater Sealant can be used easily on almost any material and works extremely well as a sealant for step gasket or crack repair.

Black Spot is typically caused by poor chlorination or high phosphate levels. The algae can feed on the phosphates, stimulating its growth. However, Black Spot has been known to survive even when there are low phosphate levels in the pool water. The key is keeping the water balanced with adequate chlorination.

All of our swimming pool ladders & steps and spa steps are blow-molded out of high density polyethylene. HDPE is a non-engineered, safe material, the same plastic used to make milk jugs.

If you see white flakes it is actually not paint but may be either calcium scale deposits or biofilm residue in your pool due to bad pool chemistry. Calcium scale deposits occur when your water has too much calcium. The white flakes may be calcium deposits that have accumulated over time.

You'll need a fiberglass repair kit to fill in the crack. While some kits may come with epoxy paint, in order to match the color of your stairs, you may need to purchase this separately. Make sure you follow the manufacturer's instructions when using the repair kit.

Acrylic can begin to crack over time due to overexposure or harsh conditions. For small cracks, use a 1/8" drill bit to drill a hole on both sides of the crack. Use a silicone sealant to fill the crack and let it dry. This should help restore the integrity and appearance of the acrylic.

How long do fiberglass pool steps last? ›

The average lifespan of a fiberglass pool finish is about 10-15 years, depending on how well it is maintained. To ensure your pool looks great for as long as possible, you should perform regular maintenance to keep the surface clean and free from any dirt or debris.

A high amount of calcium in the water will cause deposits to form on your pool's steps, making them appear white or yellowish. A calcium buildup is most common when you have hard water and if your maintenance is not thorough enough.

Pools with vinyl liners will last more than 20 years, as long as you replace your liner every 6-12 years. Concrete pools have exceptional longevity, but you need to resurface the concrete every 10 years or so. Fiberglass pools have the longest lifespans of any in-ground pool, often easily surpassing 30 years.

Epoxy paint is by far the most useful option for a fiberglass swimming pool since it is incredibly durable and 100% watertight. A pool surface covered in high-quality epoxy paint is also resistant to the chlorine in pool water, which means that it will last upwards of 10 years if properly maintained.

If the steps are not properly supported when installed; large cracks can occur. Surface Specialists can provide necessary support for pool steps and repair pool step cracks. Blisters can also appear in pool steps when water becomes trapped in air voids and pushes through the surface.

Floating steps can be a problem if all the air has NOT been removed from the insides of the step system. Please make sure you add the required amount of sand into the side panels.

We recommend you reapply Flex Seal once the area is completely dry to ensure its longevity. Q: How long will it last? A: Depending on the environment, the coats added, and maintenance, many people have found Flex Seal will last for years without cracking, peeling, or losing any of its strength or sealing properties.

We strongly recommend pool ladders and steps be removed from the swimming pool during the off season (winter months). For safety reasons this also applies to pools located in warmer climates.

It's easy to use, and can be used on homes, boats, cars, and even RVs. Before you begin, you're probably wondering how long does Flex Seal last. When applied correctly (according to instructions) Flex Seal will last for three years, even longer.

Clean Your Fiberglass Steps Above the Waterline: Most fiberglass pool stairs can be cleaned using a sponge that contains non-phosphate detergent, such as the Magic Eraser. While you don't need a name brand product, you should look for a product with a soft, non-abrasive texture that won't scratch or damage your pool.

How do I get my pool steps white again? ›

Rub a chlorine tablet directly on the pool stairs. Wear rubber gloves to protect your hands and use plenty of pressure. If the stain remains, rub the stains again with the chlorine tablet and then scrub the stairs with a tile scrubber. This may take time to remove the stains.

The Vinyl Over polymer steps are built with a strong polymer foundation utilizing interior braces with a solid polymer top, which is covered entirely with a beautiful Latham liner for a completely custom look. All vinyl over polymer steps can be used in any of our polymer wall pools or steel wall pools.

Colorful pottery and easy-care plants never go out of style. An alternative to pool ladders are footholds built right into the pool wall. (Think rock climbing crevices that are smoother and safer.) While more expensive than ladders, they do eliminate the “bulkier” profile of their ladder counterparts.

Vinegar can also be used to remove mineral deposits from a pool, shine up metal surfaces, clean your pool filter, and get rid of algae and other things growing in your pool. You can use a vinegar solution and scrub brush to accomplish most of this and use undiluted vinegar for stubborn stains.

What Causes Calcium Buildup in Pools? Calcium scaling is an unsightly white to white-grey stain, dust, or film that forms on pool sides or tile when a pool's calcium levels and pH are imbalanced. Not to worry though, calcium scaling is an easy thing to prevent with regular water testing and balancing.

Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.

Fibreglass shells rely on the water pressure in the pool to exert force against the soil around them in order to maintain their structure. If there is no water pressure in the pool, the soil around the pool can push against the fibreglass shell and cause it to crack.

Although fiberglass pools can seem flimsy compared to concrete, they're actually very durable and easy to maintain. This makes fiberglass pools more cost-effective, as there's less need for chemicals and scrubbing. But even though fiberglass pools are durable, they can occasionally develop some cracks and bulges.

1 Answer. Yes, we have successfully used a magic eraser to clean the scum line on a vinyl liner and on fiberglass steps. Always test on your pool in an out of the way area first to make sure your liner will hold up okay.

You can restore the glossy look of your acrylic by flame polishing thin sheets of acrylic (4mm thick and under) and sanding/buffing thicker acrylic sheets. For those who want a less labour-intensive way, try VuPlex polish, which we have tried and tested on acrylic to the satisfaction of our plastic experts.

Does water ruin acrylic? ›

Most acrylic paint brands are relatively water resistant. However repetitive water exposure and other elements can affect the life of your acrylic painting. By applying a layer of varnish your acrylic paint will be protected from water for longer.

A crack near the stress area of an acrylic nail can be repaired without removing all the product if the crack runs less than halfway across the nail, says Vicki Peters, NAILS Magazine Show manager and veteran nail technician.

Black spots are the result of a weakened gel coat and the breakdown of the minerals within your fiberglass surface. As your gel coat weakens and the fiberglass breaks down, tiny pinholes will form on its surface, where this sludge-like black substance surfaces.

The water level should be below the skimmer basket to prevent the skimmer basket from freezing and breaking. Drain all equipment to prevent any water within from freezing, expanding, and causing damage. Clear the water from the pool lines using a blower. This can also be an opportunity for pool leak detection.

Paint: Topcoat with two coats of quality, exterior, 100% acrylic latex paint. To keep your steps from becoming slippery when wet, add non-slip sand texture additive to the topcoat. But don't just dump any old sand in there, ask in the paint department for texture additive for paint.

1 Answer. If you have white fiberglass pool steps that turn yellow, and vitamin c or ascorbic acid based products will remove the stain you are likely dealing with metals in the water.

Algae is one of the common reasons why pool steps turn brown. Leaves and other organic debris can leave stains if you allow them to settle too long on your pool's surface. Algae can become a big problem for swimming pool owners. The problem is that it can stain your steps and change your pool water's color and smell.

Pay special attention to pH, alkalinity, and chlorine/sanitizer levels. Low levels of chlorine will lead to future algae and the return of a green pool. Remember that properly balanced pH and alkalinity will ensure your chlorine is able to work as it should.

On average, you should run your pool pump around 6-8 hours per day during winter and 10-12 hours per day during summer. Note that you need to run your pool pump longer during summer because algae grow more in warm temperatures.

Real estate experts estimate that an average 14x28-foot inground concrete pool potentially adds 5 to 8 percent to the real estate value of your home. If your property is worth $400,000, you'll realize a boost to the value of your property of about $20,000 to $32,000.

What type of inground pool lasts the longest? ›

A concrete pool has the highest lifetime cost and takes the longest to install (approximately three to six months), but it can be built to any specifications. They are the most difficult to maintain, but they also last the longest.

Steps are an essential element of pool design, flowing seamlessly into the pool's appearance and function. While they're typically built into the pool structure, they can be added during a renovation with our inground pool steps replacement services. Best of all, the project takes just two days from start to finish.

Some companies make a spray that also will add texture to the plastic. This is ideal for ladder steps to reduce slippery surfaces for added safety. Spray the paint over the ladder and allow to sit for one day before adding another coat. The paint will be fully cured after seven days.

Pool ladders hang onto the side wall of a pool and stay stationary. Occasionally pool ladders float to the surface of the pool and do not stay stationary. Apply weight to the lower end of the ladder to solve this problem. The weight acts as a anchor and holds the ladder firmly in place.

Products to consider to treat slippery underwater surfaces

Anti-Slip Spray is the highest rated aerosol spray for fiberglass/acrylic found on the market! SlipDoctors Non-Slip Spray is an epoxy aerosol that provides a hard, textured finish to help to prevent slip-and-fall accidents.

A swim ring (also known as a swimming ring, swim tube, rubber ring, water donut, floatie, inner tube, or, in the United States, a lifesaver) is a toroid-shaped (hence the name "ring" or "doughnut") inflatable water toy.

Air Leaks. The number one cause of pump surge or pulsing is your classic air leak. The more pressure your pump creates, the easier it is for air to get sucked through even the smallest leaks. And since air poses less resistance than water, it will get sucked by the pump instead of water, causing the pump to pulse.

When Does the Pool Pop Up Happen? Thankfully, the pool pop up rarely happens. In fact, it's an extremely rare occurrence, and it usually happens when there's a major flooding event or hurricane in the area, which saturates the ground and creates a super high water table.

Slippery areas can generally be addressed most quickly with the application of anti-slip tape or a similar adhesive. Anti-slip tape for pool use is often made of vinyl, though tape made with rougher, more durable materials like silicone carbide may be most suitable for docks that see heavy traffic.

What is the best cleaner for fiberglass pool steps? ›

Clean Your Fiberglass Steps Above the Waterline: Most fiberglass pool stairs can be cleaned using a sponge that contains non-phosphate detergent, such as the Magic Eraser. While you don't need a name brand product, you should look for a product with a soft, non-abrasive texture that won't scratch or damage your pool.

Are step cracks serious? Stair-step cracks along mortar joints or through the actual brick are almost always a serious matter—especially if the wall is bulging or if the cracks are larger than ¼ an inch.

Most paints have a hard time sticking to plastic because the material expands and contracts with the air temperature. However, there are some paint options for plastic ladders as well. Some companies make spray paints designed for plastic use. These plastic paints have flexible ingredients ideal for plastic.

As solvent-based pool paint, epoxy paint is one of the best options for covering interior swimming pool surfaces. It is incredibly durable and will last up to eight years with simple routine maintenance before repainting is necessary. It works well with many pool types, including concrete and fiberglass pools.