Wedding Cake Pool Steps Replacement Rails (2023)

FAQs

Can you replace steps in an inground pool? ›

Steps are an essential element of pool design, flowing seamlessly into the pool's appearance and function. While they're typically built into the pool structure, they can be added during a renovation with our inground pool steps replacement services. Best of all, the project takes just two days from start to finish.

There are so many exciting enhancements you can make in addition to changing your pool's interior finish. You can add stairs, a sundeck, benches and coves – all designed to retrofit any pool. It's easy, affordable, and usually takes just a few days to complete.

In order to prevent pool steps from floating, you will need to use 70lbs of sand during the assembly process that will weigh down the steps allowing them to sink to the bottom of the pool and stay there.

The cost of pool steps varies, depending on the style and size of your steps. For a standard 6 foot walk-in staircase, the price will start at around $9,000. The average prices range from $9,000 to $12,000.

Swimming pool stairs can be constructed from a wide range of materials, such as fiberglass, steel, and polymer, which each have unique pros and cons.

We strongly recommend pool ladders and steps be removed from the swimming pool during the off season (winter months). For safety reasons this also applies to pools located in warmer climates.

Surface Cracks – Newer rotomolded and acrylic slides rarely crack, but if they do, it can be fixed. It requires a plastic welder and PE plastic which can be purchased in flat rods. After preparation, new material of a similar color is melted into the crack, sanded and polished.

It's a highly durable, cost-effective solution versus replacing a leaking step gasket in an inground pool. AquaFlex Underwater Sealant can be used easily on almost any material and works extremely well as a sealant for step gasket or crack repair.

Standard step height is 12 inches. However, most people are accustomed to a much lower step, leading many industry experts to recommend heights between 8 and 10 inches.

Can you replace fiberglass pool steps? ›

Suppose the crack is large or the fiberglass seems flexible along the crack. In that case, you may need professional help with your inground pool step repair. On the other hand, you may repair smaller cracks with a fiberglass repair kit that just about any DIYer can use.

Pool ladders hang onto the side wall of a pool and stay stationary. Occasionally pool ladders float to the surface of the pool and do not stay stationary. Apply weight to the lower end of the ladder to solve this problem. The weight acts as a anchor and holds the ladder firmly in place.

Most pool ladders are quite lightweight and, when set in the water, tend to float. Lightweight pool ladders often have instructions from the manufacturer on how to weigh down the pool ladder to prevent it from floating up in the water.

Place plastic sandbags on the bottom ring of the ladder, the ring of the ladder that touches the floor of the pool. Doing this will weigh the bottom ring down and prevent the ladder from lifting up as you step on it.

A quick and cost-effective way to add steps to your inground pool is the drop-in (sometimes called "bolt-on") stair. These stairs are usually made from plastic or fiberglass. They can be placed anywhere in your pool's shallow end, including the corner.

Extra Credit for Water Walking

When it comes to energy expenditure, you really should count your pool steps as 120 - 150 steps per minute, a little more than you would be logging if you walked 3 miles per hour. Walking in the pool takes more energy than walking on land.

A-frames are defined as step in pool ladders which normally have handrails, making it safe and easy to use. They also typically take up less space as well. Having a safe and easy entry is important for a pool.

The simple answer is that it is never a bad idea to offer this extra protection device for your liner. Over the years, liner material has become thinner and more susceptible to rips or tears.

They're usually made from wood or synthetic materials lined with rubber and covered with pool table felt - the same material as the pool table surface, which provides a smooth playing field for the pool balls to roll on.

Treads shall have an unobstructed horizontal depth of not less than 11 inches (279 mm).

How long can water sit in plastic pool? ›

For most inflatable pools or plastic kiddie pools following the guidelines listed above, the water should be changed every two weeks at a minimum. If you are not adding chlorine to kill bacteria, drain the pool every other day. Stagnant water without chlorine can become unhealthy water in as little as 24-48 hours.

During winter, most people rarely use the pool. As such, covering the pool using a bubble or debris mesh cover can be helpful. This will protect it from any debris falling into the pool. Also, contaminants from the outside are also blocked from mixing in with the water.

While removing dirt from your slide on its own helps, waxing the slide really brings back the slick ride that the slide boasted when it was new. To do this safely, we recommend rubbing wax paper over the entire slide surface. Rubbing the wax paper transfers the food-safe wax onto the surface of your slide.

If your vinyl pool liner needs patching, HH-66 Vinyl Cement is the answer. The world's most effective PVC vinyl adhesive is ideal for mending liner tears, spa covers, and most inflatable vinyl pool toys. It works underwater, sets in minutes, and holds fast even in extreme conditions.

We recommend you reapply Flex Seal once the area is completely dry to ensure its longevity. Q: How long will it last? A: Depending on the environment, the coats added, and maintenance, many people have found Flex Seal will last for years without cracking, peeling, or losing any of its strength or sealing properties.

To remove the current railing, loosen the bolt under the escutcheon plate. Once the bolts have been loosened, lift the rail out of the anchor socket. Next, insert the Artisan or Meridian series rail and tighten the bolt. Remember to thread the escutcheon plate onto the rail before inserting into the anchor.

The best ways to remove calcium carbonate is to use a calcium releaser/cleaner, preferably an acid-free product, so it doesn't ruin the finish of the pool tile or glass. Next, you can try using a pumice stone or scale remover.

For the pool's top step, the IPSC requires a width of at least 10 inches. However, for safety, the industry norm is at least 18 inches. Each step thereafter must be at least 10 inches wide. All steps should also provide at least two feet of unobstructed horizontal surface area.

Over the years walk-in swimming pool steps have become a standard for most pool companies to include when installing an inground pool. The average pool step ranges from 4', 6' & 8'. They are offered in both straight and curved design to be cordinated with the pools shape.

What is the best depth for steps? ›

The tread depth code for residential stairs should be no less than 10 inches with nosing, no less than 11 inches without nosing, and maximum tread depth variation should also be less than 3/8 of an inch.

Structural Fiberglass Stairs have a 75+ year life expectancy and offer the lowest life cycle cost of any stair system in today's market.

Black spots are the result of a weakened gel coat and the breakdown of the minerals within your fiberglass surface. As your gel coat weakens and the fiberglass breaks down, tiny pinholes will form on its surface, where this sludge-like black substance surfaces.

A high amount of calcium in the water will cause deposits to form on your pool's steps, making them appear white or yellowish. A calcium buildup is most common when you have hard water and if your maintenance is not thorough enough.

Pool Collapse – An above ground pool collapse is often caused by the results of ice damage, but it can also happen when there is too much snow accumulated on top of the pool and the frame cannot handle the weight.

Your pool can cave in for multiple reasons, but the main culprit is leaking water. Problems with these pool walls moving are most of the time related to water loss from the pool. This causes frost heaving and the pool walls to creep inwards over time and also destroys concrete and older style plastic coping.

This is because their feet might slip through the gap between treads and result in injury. Similarly, the absence of a balustrade or handrail is also dangerous.

40-lb Weights Suitable for Heavy-Duty Pool Entry Systems

A 26-inch step will usually require 2 of these weights while a 36-inch step will need 3-4 weights. As a rule of thumb, heavier steps require 100 to 150 lbs of weights.

Pool Cake. How to protect pool liner from heavy steps ! Just cut pool noodles into sections and place around the bottom of steps !!!

How do you secure an outdoor step? ›

To make your stairs safer, install abrasive safety strips (available at home centers) to each step. After cleaning the surface and allowing it to dry, attach the strip near the front of each step to make your home safer.

A high amount of calcium in the water will cause deposits to form on your pool's steps, making them appear white or yellowish. A calcium buildup is most common when you have hard water and if your maintenance is not thorough enough.

We strongly recommend pool ladders and steps be removed from the swimming pool during the off season (winter months). For safety reasons this also applies to pools located in warmer climates. Unsupervised access to the pool must not be allowed.

Treads shall have an unobstructed horizontal depth of not less than 11 inches (279 mm).

Standard step height is 12 inches. However, most people are accustomed to a much lower step, leading many industry experts to recommend heights between 8 and 10 inches.

Pools should have stairs, or another type of entry/exit on the shallow side of the first slope change. In short, the shallow end of the pool should have stairs.

The average lifespan of a fiberglass pool finish is about 10-15 years, depending on how well it is maintained. To ensure your pool looks great for as long as possible, you should perform regular maintenance to keep the surface clean and free from any dirt or debris.

Fiberglass can be painted successfully. You have to look at it as though you were painting plastic. The concern with this particular project is that you're painting steps that will be used on a daily basis, so the treads will become worn and need recoating over time.

Rub a chlorine tablet directly on the pool stairs. Wear rubber gloves to protect your hands and use plenty of pressure. If the stain remains, rub the stains again with the chlorine tablet and then scrub the stairs with a tile scrubber. This may take time to remove the stains.

How do you clean white inground pool steps? ›

Use a Sponge or Cloth for Cleaning: Use your soft sponge and vinyl-safe detergent to gently scrub the pool stairs. Use slow, circular motions to achieve the best results. Since you're likely to miss a spot the first time, it's a good idea to repeat the process twice if possible.

A close relative to green algae, mustard algae can be yellowish, yellow-green or brown in color and is typically slimy. Commonly mistaken for dirt or sand, mustard algae will persistently cling to pool surfaces, light fixtures, wall fittings, ladders and other items, like toys or bathing suits.